A123 4600mAh 3s2p LiFePO4 26650 Battery Pack
3-cell 9.9V A123 battery pack using genuine A123 Systems LiFePO4
cells, complete with JST-XH balance connector and female Deans
This pack consists of six cells in total. Three cells are wired in
series and connected in parallel to three additional series-wired
cells to give a 3s2p pack with a total capacity of 4600mAh. The
pack should be charged as a 3-cell pack.
The pack layout is 2×2x2 (Refer to image).
This pack can be charged at a maximum of 20 amps through the Deans
Ultra plug but should be balanced regularly for a long service
life. A LiFePO4 compatible battery charger must be used, such as
the Graupner Ultramat 14 Plus.
Nominal pack voltage: 9.9V
Fully-charged pack voltage: 10.8V
Recommended cut-off voltage: 7.5V (2.5V per cell)
Minimum voltage: 6.0V (2.0V per cell)
Do not charge above 10.8V.
Capacity (mAh): 4600
Dimensions (mm): 203x31x55
Pack Configuration: 3S2P
Balance Plug Type: PolyQuest
Continuous Discharge (C): 30.0C
Continuous Current (A): 138.0A
Burst Discharge (C):60.0C
Burst Current (A):276.0A
Maximum Charge Rate (C):4.3C
Maximum Charge Rate (A):20.0A
WE CAN ASSEMBLE BATTERY PACKS ACCORDING TO YOUR
CONFIGURATIONS.CUSTOM DESIGN WELCOME!